Backhoe Stabilizer Bumpers

[Steve_Miller]

Here's something else I found a good use for in my stash of junk (I me parts).

Steve

 

[Steve_Miller]

Another shot.

 

[PineRidge]

Steve I realize it's a bumper but I don't recognize what it's made from. Does it eliminate the metal on metal slapping?

 

[Steve_Miller]

It's a rubber bumper off of who knows what. It stops the stabilizer from slamming into the backhoe when I forget to slow it down on the way up. It also stops the hoses from being pinched between the framework and the cylinder as well. I sort of got too close when I took the picture.

Steve

 

[KiotiOrange]

I had the problem with my Kioti BH on the first use. Pinched the left side hose and had to get a new hose and cylinder. I has thinking of getting a coupe of the hood bumpers from Kioti and doing something similar.

What material are yours? How did you fasten them? I really need to do something 'cause one of these days I'm not going to be babying the arm up and..... OUCH again.

KiotiOrange

 

[PineRidge]

Never felt the need for a rubber bumper on the New Holland BH. The hydraulic lines must be better protected because I have slapped the stabilizers up on more than one occasion and haven't done any damage, yet.

If someone needed a set of bumpers I'm thinking that a set of toe stops like they use on roller skates might do the same thing and they are already pre-drilled to be bolted on and are inexpensive to boot. toe stop link

 

[rcrcomputing]

</font><font color="blue" class="small">( Steve I realize it's a bumper but I don't recognize what it's made from. Does it eliminate the metal on metal slapping? )</font>

My bumpers are from Jon DePratt. They are from land Pride. I'm supposed to be taking pictures for kiotijohn, but I can't ever remember to do it. I'll try to do it today! They work great.

 

[Jagmandave]

You can buy rubber bumpers with a stud bonded on one side, then either drill and thread the hole or drill thru and put a nut on, they're cheap too. Grainger has 'em for example, in all different sizes.......

 

[KiotiJohn]

Looks good Steve. Something that just occurred to me is that one could go to a you pull it auto grave yard and take off the bumpers from under the hood used to keep the hood tight and not rattling. Should make a good bumper for the backhoe stailizers and shouldn't cost much at all.
John

 

[rcrcomputing]

Ok, here's my bumpers. Pardon the dirty tractor. Been in the mud digging wet clay.

What the heck, here's my new canopy my little pregnant daughter got me! /forums/images/graemlins/smile.gif

What the heck, here's my new canopy my little pregnant daughter got me! /forums/images/graemlins/smile.gif

 

[KiotiJohn]

Great fix you got with those Landpride bumpers.
All those colors in your canopy and not one bit of orange!
Thanks for the pics.
John

 

[PineRidge]

Rcrcomputing if I had a canopy like yours and someone was taking a picture of it it would be real hard for me to keep from laughing out loud. With that straight face you must be real good at playing poker. /forums/images/graemlins/grin.gif

Thanks for the pictures and starting my day off with a chuckle.

 

[rcrcomputing]

</font><font color="blue" class="small">( Rcrcomputing if I had a canopy like yours and someone was taking a picture of it it would be real hard for me to keep from laughing out loud. With that straight face you must be real good at playing poker. /forums/images/graemlins/grin.gif

Thanks for the pictures and starting my day off with a chuckle. )</font>

/forums/images/graemlins/smile.gif The Picture was thier idea as well.. It's hard for me to say no to my eldest. She's a wonderful girl. She's in the Air Force and doing college. Can't say how proud I am of her.

 

[PineRidge]

Sounds to me like you have good reason to be a proud father.