Backhoe backhoe stabilizer pads

   / backhoe stabilizer pads #1  

BuildIdaho

New member
Joined
Apr 5, 2005
Messages
15
Location
Idaho
Tractor
Kubota L 3400HST
Just had a new BH-75 hoe installed on my L-3400 HST. Does anybody make pads for the stabilizers? The metal feet are real hard on the area that I will be using the unit. /forums/images/graemlins/cool.gif
 
   / backhoe stabilizer pads #2  
Build,

I got rubber grouser pads with my L39 from Kubota. You sould ask if they make them form your hoe...Otherwise it wouldn't be too hard to make a set out of wood, or thick rubber if you can find it. They just bolt up under the steel feet. It would be very simple to fabricate yourself. Good luck.
 
   / backhoe stabilizer pads #3  
Watch for a truck tire recap that has came off on the highway… apply a sawzall and you can make a custom heavy duty pad /forums/images/graemlins/laugh.gif. KennyV.
 
   / backhoe stabilizer pads #4  
Kubota makes pads for the BH-90. I got them on mine when I purchased it. They MUST make them for your hoe as well. They were pricey.. not sure how much.. but not cheap. Well made though. Contact your dealer.
 
   / backhoe stabilizer pads #5  
BuildIdaho
You need #L9467 rubber stabilizer flip pads for your backhoe. Two sets would be required at $52.00 each. Hope this helps.
Lewis
 
   / backhoe stabilizer pads #6  
You might try making some out of baltic birch plywood. I use to get scraps now and then from a guy that had a buddy that worked for a company that did just that several years ago. Not a clue as to what the name of the company was but I am in the Minneapolis area if you do an internet search.
 
   / backhoe stabilizer pads #7  
I made these , all you need to do is pick up the next recap you see alongside the road , use lenghts to fit of 2x10's and four carriage bolts and your good to go!!

Pictures in a slide show
 
   / backhoe stabilizer pads
  • Thread Starter
#8  
Thanks folks! I'll figure on some. Not today tho: Me and the wife are heading to Alaska for the early King and halibut...they fear me
 
   / backhoe stabilizer pads #9  
I made a set of pads out of treated 2" x 10" for my BL4690. Used carage bolts and wing nuts for fast on/off.

See photos.

ksmmoto
 

Attachments

  • 650641-KSM Kubota BL4690B Backhoe Setup Items 01.jpg
    650641-KSM Kubota BL4690B Backhoe Setup Items 01.jpg
    65.1 KB · Views: 1,281
   / backhoe stabilizer pads #10  
Another Photo.

ksmmoto
 

Attachments

  • 650642-KSM Kubota BL4690B Backhoe Setup Items 02.jpg
    650642-KSM Kubota BL4690B Backhoe Setup Items 02.jpg
    44.2 KB · Views: 1,692

Tractor & Equipment Auctions

Snow Ex Snowplow (A49339)
Snow Ex Snowplow...
1996 Chevrolet Silverado K2500 4x4 Pickup (A49339)
1996 Chevrolet...
Burkeen B-16 Trencher (A49339)
Burkeen B-16...
3/4 of 55 Gallon Antifreeze (A43476)
3/4 of 55 Gallon...
Deluxe Hitch Plate (A49339)
Deluxe Hitch Plate...
Case 1494 Loader MFWD Tractor (A49339)
Case 1494 Loader...
 
Top