Hopefully it will give you 20 more good years!
Bad news on my TC33D
- Thread starter John_Mc
- Start date
- Views: 23663
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 10,983
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
Always glad to hear when things work out better than first expected! Congratulations!
OP
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,567
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
Just got the final bill. The total was about half what the dealer estimated "if everything came apart and went back together well, and no further damage was found." That estimate did not include dealing with removing and replacing all of the "extras" I've had installed on the tractor over the years.
Used clutch housing from Long Lane Tractors in PA was $1000 vs $2860 new. Lots of O-rings and misc parts from the dealer. Great work done quickly and inexpensively by Mark Guillemette of Old Iron Repair just 5 miles down the road.
Used clutch housing from Long Lane Tractors in PA was $1000 vs $2860 new. Lots of O-rings and misc parts from the dealer. Great work done quickly and inexpensively by Mark Guillemette of Old Iron Repair just 5 miles down the road.
dodge man
Super Star Member
A good ending, glad to hear it.
hornett22
Platinum Member
Gregster613
Platinum Member
- Joined
- Apr 19, 2009
- Messages
- 819
- Tractor
- 273 TYM. 2009 //Yardmachines 7 Speed Shift-on-the-goScotts L2048
Glad to hear that you are now back up and running!! Good job of dealing with frustration!
OP
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,567
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
No, the part I installed was the original part number. There are two part numbers. One fits the pre-2002 models only, the other fits newer as well as older. Neither the dealer nor any of the used parts guys had any idea if the newer part was actually better, or just different. (One made a comment that the newer part was “drilled and tapped to fit both old and new”.)
This same part fit a wide range of model numbers, not just the TC 25/29/33 series.
hornett22
Platinum Member
Gotcha. I thought maybe this was a known problem and there was an updated casting.
OP
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,567
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
It is a known problem.
