Banjo bolt

[tarheel96]

I need some help finding the location of some banjo bolts in a Yanmar 2TR17 engine. They should be two for the oil line and two for the fuel line but I dont know which ones go to what? I have two bolts with the small holes and two with the bigger holes. I didn't take the motor apart but I am the one putting it back together so I am doing my research before reassembly. thanks

 

[kirkawilson]

The Hoye link in this thread has some diagrams that might help.
http://www.tractorbynet.com/forums/yanmar/166970-ym240-banjo-banjo-bolt.html

 

[tarheel96]

Thanks kirkawilson for the link. I will check it out now.

 

[tarheel96]

I know the bolts go into one of two locations. The first locations is the lines that run from the fuel tank neck to the motor...called the fuel return hose. Or the second location is the oil line connections that are located at the manifold with 8mm banjos. I think the two bigger hole banjo bolts are oil and the two smaller hole banjo bolts are fuel..?

 

[thepumpguysc]

#4 post is correct.. BIG to oil..

 

[tarheel96]

#4 post is correct.. BIG to oil..

Thanks thePumpguy!