BB for a 25 Horse Power CUT
- Thread starter kcook
- Start date
- Views: 740
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
Start with the outside measurement of your rear tires. Without more info to go on, I can only generalize based upon traction; 4 foot for 2wd, 5 foot for 4wd. Brand depends on your budget
//greg//
//greg//
HammerFour
Gold Member
- Joined
- Sep 5, 2002
- Messages
- 297
- Location
- Holt, Missouri
- Tractor
- Kubota B7100, JD Gator 6X4, Kubota L2350, JD 14T Baler, JD 894A Side Delivery Rake, IH 100 Balance Sickle Mower
Another good rule of thumb is buy it wide enough to cover your tire tracks...so measure the width of the back tires.
I have a King Kutter, it has held up fine but I don't use it much.
I have a King Kutter, it has held up fine but I don't use it much.
George2615
Super Member
I agree that a BB should be wide enough to cover your tracks. My 26HP tractor measures just under 5'. I bought the KK 5' BB and KK rake at TSC, both for about $525. Probably could have went with 6' or even 7'ers but forgot to measure the tractor before I went. I'd go with a foot wider to compesate for angling the blade.
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
Just bought a 5' Frontier for $418 for my 18.5 hp JD 4010.
Used a 4' snow blade on my 12 hp Gravely. Sold it for $200, actually $350 for it and a rotary plow.
Ralph
Used a 4' snow blade on my 12 hp Gravely. Sold it for $200, actually $350 for it and a rotary plow.
Ralph
