BB or bulldozer?

[Milton Burro]

You need a little room there to get them out when caked with mud, etc. The 3-pt. pins should be reasonably snug in the arms and the blade.
Jim

Done deal. Picked up four collars, slid the pins through and clamped the collars in place while I welded them on. After cooling and a bit of dress up, pins slide nice and snug. Thanks again. It's not rocket science, but there's more to this tractor business than meets the eye. I leveled and squared the BB to the tractor, I'm ready to move some dirt. ( now if I just had a hydraulic top link,,,,,) :thumbsup: