I bought a BCS 201 tiller yesterday. It had set outside for 5 years and the carburetor was in bad shape. I took it apart and cleaned and blew out passages. Now it will start, only when I squirt some gas in the carb and close the choke. It will run for a second. I am getting gas in the bowl, but I do not know what the carb settings are supposed to be. I can see one screw with a o-ring and I unscrewed it 2 turns, but that didn't help. Does anyone have the carb settings, and is there just one screw to set? I am going to email bcs America and see if I can get a owners manual, but not sure if it will have the carb settings. Thanks
BCS 201 carburetor settings?
- Thread starter jerryd
- Start date
- Views: 6097
farmerboybill
Platinum Member
- Joined
- Mar 4, 2008
- Messages
- 782
- Location
- Southwestern Wisconsin
- Tractor
- BCS 850 diesel and 735 diesel
Hi Jerry,
Do you have the BCS engine or a briggs on it? I don't know carbs, but whoever comes on will need to know that.
Bill
Do you have the BCS engine or a briggs on it? I don't know carbs, but whoever comes on will need to know that.
Bill
