Beaver wiring

[goat man]

My wiring on my Beaver Satoh diesel S370 is brittle and should be replaced. Is there a wire harness or a diagram available for
these?

 

[CADplans]

Luckily, your tractor is old enough that,, I believe,, it was built before the computer was invented!!
There is not much to the harness,,
I would probably simply hand rewire the tractor,.

Any available harness is as old as the tractor, and,, if not already,
will soon have the same brittle wire problem you already have.

Starter, glow plugs,, headlights,, that is about all there is.

 

[workinonit]

Agree, you would have to get the wiring harness off and send it to someone to duplicate. Might as well do it yourself if you have it out already. There are companies that make harnesses.

 

[Troy lynds]

What companies make the wiring harnesses for thr satoh s370d?

 

[Roadworthy]

Purchase some spools of good quality insulation stranded copper wire after determining the wire sizes you need. You rarely need anything bigger than number fourteen and number sixteen will probably work for most of it. You can even invent your own color code or do the whole thing in one color and really complicate future troubleshooting. You can replace one wire at a time rather than pulling off the whole harness and trying to figure out what went where. It need not be a difficult project.