bedder hiller

[bullet20]

looking forany ideas on making a bedder/hiller for home use or any ideas that will work and save $$

 

[Reyer Farms]

Check out agri supply co. You can get your hiller disc and build a frame pretty cheap. Also Rainflo irrigation, they utilize a moldboard to move soil into press pan. It is a way you can build it all your self with no moving parts. Good luck.

 

[Creamer]

I have been looking for one as well. Agri Supply has 16" discs on a shank but I am still looking for clamps. Agri Supply only have clamps for their toolbar which I believe is 1.25" square. I would prefer a larger toolbar and a full 60" width. The only other one i found that I liked but it is too much money is the Iowa Farm Equipment. They have a two disc gang that could really do a nice job but the only sell it on the frame for $800. That price kept me looking!

 

[Reyer Farms]

Flat plate with four holes for u bolts. Weld some 1/4" rod on plate to seat shaft in between and u bolts will hold better.

 

[Ken Pike]

Here is a couple I made (posted here before, I think). One used the metal parts from an old set of horse drawn hoes, the other uses a couple of discs from an old disc harrow & mounts to my 3 pt. trailer hitch/log skidder. Both work great.

 

[Spindifferent]

I just purchased the Hilling Disk & Shank Asby, 16" and clamps to attach to a 4" square toolbar:

Farm Parts Store - page 2

Very heavy-duty and great customer service from Buckeye.

- Spindifferent

 

[Terrydt100]

[ATTACH=CONFIG]309617[/ATTAoCH]I built a hiller/bedder from front end of garden tractor works great.email me if you have questions or want more pictures.

 

[cmhyland]

[ATTView attachment 309618ACH=CONFIG]309617[/ATTAoCH]I built a hiller/bedder from front end of garden tractor works great.email me if you have questions or want more pictures.

Terry,
Looks like you used the front axle from an old lawn&garden tractor. So I see you use the tierods to adjust angle. and the roller on the back is to flatten the top of the row?
The end looks like you have a furrower.... I'd love to see the rows this makes.... It's a very nice setup.... Talk about green.. it's all recycled...

Regards,
Chris

 

[Terrydt100]

Makes good rows when dirt is worked up .

 

[Don87]

View attachment 309632View attachment 309632Makes good rows when dirt is worked up .View attachment 309631

Lordy..........Now I gots a flat spot on me head from viewing the pics:laughing: :laughing:

 

[Terrydt100]

Not sure why sometimes my posts end upside down. When I click on them to expend they are right side up. I down load from my iPad . If I can't fix it with a hammer I can't fi

 

[Don87]

Not sure why sometimes my posts end upside down. When I click on them to expend they are right side up. I down load from my iPad . If I can't fix it with a hammer I can't fi

Some in here claim it's the I-phone app. I'm using a desktop, and don't have an internet phone so I don't have a clue.

 

[bullet20]

lol it is hard to stand on my head for periods and stare at your pic lol , looks like it does a good job!

 

[Basquill]

Hello. I was wondering whether the the bedder/hiller with the horse drawn hoe plates works any better than the one with discs? I have a couple plates like that I thought of rigging up a home made tool bar to mount them on. Most of the bedders I see on-line are made with discs, however.

Thanks

Sean

Here is a couple I made (posted here before, I think). One used the metal parts from an old set of horse drawn hoes, the other uses a couple of discs from an old disc harrow & mounts to my 3 pt. trailer hitch/log skidder. Both work great.View attachment 309607View attachment 309608View attachment 309609View attachment 309610