Bent drawbars
- Thread starter Eric_Phillips
- Start date
- Views: 1951
SPYDERLK
Super Star Member
- Joined
- Feb 28, 2006
- Messages
- 12,540
- Location
- VA
- Tractor
- JD2010, Kubota3450,2550, Mahindra 7520 w FEL w Skid Steer QC w/Tilt Tatch, & BH, BX1500
My JD 2010 is the only tractor I have with a stepped drawbar. Its 60s vintage tho. It may be cost factor as the cause for the move to more of the straight ones. Check with JD anyway. Maybe they can help.
kneedeep
Veteran Member
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 33,727
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
My local Farm Supply store carries them.
There are variations in length, hole position, pin hole size, amount of drop, width/thickness of beam. So when searching I'd want all those dimensions with me.
I believe they were more common in older tractors because of the larger variety of uses. My 1984 Ford has one. My 2012 Kubota does not.
There are variations in length, hole position, pin hole size, amount of drop, width/thickness of beam. So when searching I'd want all those dimensions with me.
I believe they were more common in older tractors because of the larger variety of uses. My 1984 Ford has one. My 2012 Kubota does not.
