Draw bar hardware

   / Draw bar hardware #1  

missesalot

Bronze Member
Joined
Mar 25, 2017
Messages
99
Location
Brockport NY
Tractor
tc45d
I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?
 
   / Draw bar hardware
  • Thread Starter
#3  
dang. I even looked first like a good forum citizen. Funny how when you search on 1.25" something different comes up than if you search 1 1/4". Thank you!
 
   / Draw bar hardware #4  
Welcome, we all been there.... and will be again.
 
   / Draw bar hardware #5  
I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?
3/4 or 7/8 will have a little slop but won't hurt a thing, most of us use those size pins on the farm.
 

Tractor & Equipment Auctions

2007 JOHN DEERE 310SJ BACKHOE (A50458)
2007 JOHN DEERE...
PALLET OF PIPE CLAMPS (A50854)
PALLET OF PIPE...
2010 Case 660 Trencher (A50322)
2010 Case 660...
2003 FREIGHTLINER FL80 DUMP TRUCK (A51406)
2003 FREIGHTLINER...
8 DRILL COLLAR (A50854)
8 DRILL COLLAR...
2008 FREIGHTLINER FLD120 SD DAYCAB (A50854)
2008 FREIGHTLINER...
 
Top