Bent on the 4th of July

[RayCo]

The last two I needed came from an auto parts store. Napa has a good stock in my area.

Interesting. I'll be heading to Napa in a few hours! Thanks MarkV

 

[RayCo]

It turns out that I didn't hit a rock to bend the elbow adapter for my bucket cylinder. Instead, when fully curling the bucket in, as the hydraulic cylinder came closer to the dipperstick, the adapter hit my Wallenstein thumb bracket and that's what caused it to bend. I adjusted the location of the thumb, replaced the adapter, topped off the fluid, and all is good again. But, lesson learned - CHECK CLEARANCES.

 

[tommu56]

Ray I would check at Clark industrial supply on high street in pottstown its just east of the old tsc building you have to get off 100 at king street (West) go 1 block turn left its on your way to erb's

they make all sorts of hoses and have fitting's too

tom

 

[RayCo]

Ray I would check at Clark industrial supply on high street in pottstown its just east of the old tsc building you have to get off 100 at king street (West) go 1 block turn left its on your way to erb's

they make all sorts of hoses and have fitting's too

tom

Thanks Tommu. It's nice having people here who know my (our) area.