Bent this part of the deck from my JD X540 54" deck

   / Bent this part of the deck from my JD X540 54" deck #1  

tkrotchko

New member
Joined
May 20, 2009
Messages
11
IMG_0667.jpeg

This part reinforces the back part of the deck by the discharge chute in case you catch something (like I did). It's 1/8" case-hardened steel, and of course it bent. I can get the deck back into shape because it's mild steel, but I tried bending this piece and because it's case-hardened it has memory so it now it's almost impossible to get completely flat, which means it's catching on things and bending again. [note: the part that is bent down is on the bottom of the picture]

I checked here: https://partscatalog.deere.com/jdrc/sidebyside/equipment/72357/referrer/navigation/pgId/347942771 and it lists no such part, but perhaps I'm looking at the the wrong diagram?

Any ideas on how to track the part number down?
 
Last edited:
   / Bent this part of the deck from my JD X540 54" deck #2  
Possibly look under section titled lip sections on the mower deck & lift linkage.
 
   / Bent this part of the deck from my JD X540 54" deck
  • Thread Starter
#3  
   / Bent this part of the deck from my JD X540 54" deck #4  
Try another page, to get to this one. Part # M155785

Goes with the powerflow
 

Attachments

  • 540X_54C_plate.jpg
    540X_54C_plate.jpg
    99.2 KB · Views: 156
   / Bent this part of the deck from my JD X540 54" deck
  • Thread Starter
#5  
That's it. I should have realized it was there to reinforce for the powerflow. Thank you!

EDIT: ....and I ordered it along with a few other broken parts for my my powerflow bagger system that I've been hot-gluing together.

Much appreciated.
 
Last edited:
   / Bent this part of the deck from my JD X540 54" deck
  • Thread Starter
#6  
Just a follow up, I did install this part along with the accordion plastic in the bag collection system and it's has markedly improved the vacuum of the system and greatly improved it's ability to pick up grass and leaves. I believe the bent part not only reinforces the deck, it seems to also helps seal the system just a bit.
 

Tractor & Equipment Auctions

New/Unused 2025 MX-CRT23 Mini Skid Steer (A44391)
New/Unused 2025...
Zero Turn Mower (A44572)
Zero Turn Mower...
2018 Bomag BMP 8500 Trench Compactor (A44391)
2018 Bomag BMP...
2017 KENWORTH T680 TANDEM AXLE SLEEPER (A43004)
2017 KENWORTH T680...
2012 Mack CHU613 Truck, VIN # 1M1AN09Y8CM008889 (A44391)
2012 Mack CHU613...
2016 Ford Fusion S Sedan (A44572)
2016 Ford Fusion S...
 
Top