Snow Attachments Ber-Vac Snowblower PTO HELP!!!!

[johnw]

Hi everyone, I need a part for a Yanmar YRS-60 made by Bervac. It's an older model, probably made in the 70's. There's a collar that secures the fan blades to the shaft that runs right thru the center of the blower. This collar has a shear bolt but it did not break in time and the collar split right in half on me. Any suggestions on locating one of these? thanks, john.

 

[leonz]

Hi everyone, I need a part for a Yanmar YRS-60 made by Bervac. It's an older model, probably made in the 70's. There's a collar that secures the fan blades to the shaft that runs right thru the center of the blower. This collar has a shear bolt but it did not break in time and the collar split right in half on me. Any suggestions on locating one of these? thanks, john.

Bervac is still in business and making snow blowers, short of that if you know the type of nut it is, a good hardware store, NAPA or Mcmaster Carr will have one in stock.

If it is castle nut with a roll pin (most likely)they are easy to obtain.