Snow Attachments Ber-Vac Snowblower PTO HELP!!!!

   / Ber-Vac Snowblower PTO HELP!!!! #11  
Hi everyone, I need a part for a Yanmar YRS-60 made by Bervac. It's an older model, probably made in the 70's. There's a collar that secures the fan blades to the shaft that runs right thru the center of the blower. This collar has a shear bolt but it did not break in time and the collar split right in half on me. Any suggestions on locating one of these? thanks, john.
 
   / Ber-Vac Snowblower PTO HELP!!!! #12  
Hi everyone, I need a part for a Yanmar YRS-60 made by Bervac. It's an older model, probably made in the 70's. There's a collar that secures the fan blades to the shaft that runs right thru the center of the blower. This collar has a shear bolt but it did not break in time and the collar split right in half on me. Any suggestions on locating one of these? thanks, john.



Bervac is still in business and making snow blowers, short of that if you know the type of nut it is, a good hardware store, NAPA or Mcmaster Carr will have one in stock.

If it is castle nut with a roll pin (most likely)they are easy to obtain.
 

Tractor & Equipment Auctions

2007 CHEVROLET BUCKET TRUCK (A52472)
2007 CHEVROLET...
CAT Skid Steer (A50322)
CAT Skid Steer...
Bobcat 3400 4x4 Utility Cart (A51691)
Bobcat 3400 4x4...
2016 LINK-BELT  235X3 SPIN ACE EXCAVATOR (A52472)
2016 LINK-BELT...
Guard Rail Pieces (A51692)
Guard Rail Pieces...
40FT Shipping Container (Modified for Parts Storage) (A51573)
40FT Shipping...
 
Top