239Design
Member
Hi, does anyone have one of these for a max 28?? BERMXBL-62b
BERMXBL-62b
- Thread starter 239Design
- Start date
- Views: 1645
oldpilgrim
Elite Member
What?
Sorry about that, its a 62" Heavy snow/light utility Blade for Max 28. With a sub frame mount. http://www.distributionjpb.com/media/cms/doccenters_mod/6/SouffleurAvant2012.pdf There is not much info out there on them??? I seen the local dealer at a fair this week and was quoted 2500 bucks .
oldpilgrim
Elite Member
looks like you might have to remove the fel sub frame.
JerryK
Elite Member
- Joined
- Feb 21, 2004
- Messages
- 3,261
- Location
- Vanderbilt, Michigan, USeh?
- Tractor
- Mahindra (2011)5035 HST TLB & (2016)2555 HST Cab & (2017)1526 HST(2018)Cub Cadet Pro Z 154L (1991) Caterpillar E70B
Hoe 4pt is at the sides, blade/blower subframe runs in the middle from front to back, 4pt should stay. Hoe and FEL gets taken off... [ uneducated guess ] [ you can leave the FEL on if you want to ride around with it sticking up in the air all winter...... ] [ and you can leave the hoe on if you really want.. ] 
Thanks for the info guys. I guess I just wanted to know if anyone has a set up like this and is it worth $2500.00 I know the FEL has to come off as that is what powers the up/down and angle of the blade. i don't mind taking the hoe off but I'm not into removing the hoes sub frame or 4 point (new to the tractor thing) Is it true... he who dies with the most attachments wins... i might have to make a shirt that says that!
dickfoster
Elite Member
Don't think I'd want to be removing any subframes either. That would be quite a job on my machine. In fact I'd go shopping for something with a skid steer mount so I'd just have to remove the front bucket. There has to be something like that out there somewhere. I'd probably remove the backhoe and will but not it's subframe for pushing snow around.
BlackOps
Platinum Member
i use my fel and that works - no need for other stuff for my scenario - but could see a readon if needed. but removing all the subframe is WHOA!!!! no way! **** i do not even remove my fel when midmower is on. just not going there. fel is used 99% of the time so why remove and sub assembly - no no no way!
