Berta flail mower adjustments??

[CodeMonkey]

Where can I find a manual for a Berta flail mower that is in english?

The one I have is in Italian (I think) and I googled for an online manual and looked on their website and I couldn't find anything.

I looked for vids and didn't find anything there either.

I want to adjust the height, the amount of cutting (I read somewhere that you could remove a baffle or two) and eventually I will need to adjust the PTO angle/height/etc. to work with taller wheels/tires.

TIA

 

[farmerboybill]

It's pretty simple to change from the low setting to the high setting. I've done it a few times without a manual. Tracmaster has a parts breakdown on their website http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&ved=0CDsQFjAF&url=http%3A%2F%2Fwww.tracmaster.co.uk%2Fspare-parts%2Fdoc_download%2F480-flail-mower-attachment-berta.html&ei=lkiJVcScMsOryASQ34yACQ&usg=AFQjCNGU8yzfxv7-OYi1g8EDQTJ4jlSh7A&sig2=Yo6650BV59xN10LwrxHb3g&bvm=bv.96339352,d.aWw

The baffle is removed by removing the four lock nuts on top and to the rear of the shroud. The baffle comes out from underneath.

Adjusting the cutting height involves raising or lowering the roller. I find it easiest to do this by tipping the flail mower up on its side Remove the rear m8 bolts and loosen the front bolts with 13mm or 1/2" wrench wrenches. Swivel the roller up or down as wanted. You can get more height by moving the front bolts to the lower hole as well.

 

[CodeMonkey]

Thanks