BH77 backhoe vs KX008 Tiny-Mini Excavator

[4570Man]

Disable the seat safety and use the CC lever to drive the machine forward.

 

[Jchonline]

I dont think the L2501 has the CC lever does it? If I recall the Grand Ls do, and I know the Ms do. On the M62 they have a handy "creeper" lever....so I can raise the downriggers, inch forward a bit, put them down, and keep digging. It is actually pretty fast. For digging in a straight line it is awesome.

 

[Ortimber]

I dont think the L2501 has the CC lever does it? If I recall the Grand Ls do, and I know the Ms do. On the M62 they have a handy "creeper" lever....so I can raise the downriggers, inch forward a bit, put them down, and keep digging. It is actually pretty fast. For digging in a straight line it is awesome.

Yes, the hydro economy L’s have cruise as an option.

 

[Ortimber]

Many TLB's have an 18 foot reach.

True, but not a BH77.

 

[Geotech]

I dont think the L2501 has the CC lever does it? If I recall the Grand Ls do, and I know the Ms do. On the M62 they have a handy "creeper" lever....so I can raise the downriggers, inch forward a bit, put them down, and keep digging. It is actually pretty fast. For digging in a straight line it is awesome.

Okay I get it....:confused3: So you can reposition down the line without swiveling around the seat. My L2501 has a cruise lever. If I pull it, the forward pedal depresses without my foot and the tractor will move forward.

 

[4570Man]

Many TLB's have an 18 foot reach.

I’ve got a full size backhoe and it would eat the 1 ton mini for lunch or carry 3 of them in the front bucket, but a BH-77 and a 310 is a substantial difference.

 

[bruceha2000]

Many TLB's have an 18 foot reach.

18 feet? That would be on a pretty big tractor I would think. The BH reach on my tractor is only 10'.

How do you use cruise control work with the backhoe?

Move REALLY slowly and dig REALLY fast?

Disable the seat safety and use the CC lever to drive the machine forward.

And raise the back wheels off the ground with the BH outriggers when you want it to not move?

I've seen a video of a guy with a JD 1025 who moved the machine forward by raising the outriggers and pushing with the backhoe. I assume the tractor was in neutral. Don't know if that is a recommended method though. Might be a lot of stress on the BH.

 

[4570Man]

18 feet? That would be on a pretty big tractor I would think. The BH reach on my tractor is only 10'.


Move REALLY slowly and dig REALLY fast?


And raise the back wheels off the ground with the BH outriggers when you want it to not move?

I've seen a video of a guy with a JD 1025 who moved the machine forward by raising the outriggers and pushing with the backhoe. I assume the tractor was in neutral. Don't know if that is a recommended method though. Might be a lot of stress on the BH.

I suppose you could take the lift the wheels off the ground approach but the cc lever was reachable from the backhoe seat. Driving forward was a lot faster then pushing with the backhoe.

 

[bruceha2000]

I'll need to find out how the CC works on my tractor. Haven't done anything yet that would benefit from CC. I have ASSUMED that it works the same as on my little garden tractor - get to speed and while still pushing on the go pedal press the CC lever. Not something that would be beneficial in a trench digging operation.

 

[4570Man]

The one on my L3240 was a lever in the same place and opposite side as the 3 point hitch control lever. You didn’t have to touch the lever and just moved the lever to move forward. It didn’t have reverse which was a slight drawback.