biggest KK boxblade for ck30hst??///

mrutkaus · Jul 2, 2006

walked around tractor supply today, wondered what your recommendations were for the largest boxblade, king kutter, i should use on ck30hst???

mike

Dodgeram · Jul 2, 2006

I was out "playing" with my BB today.
It's a 5' and I filled it with some pretty heavy (ie packed) dirt without stopping the Tractor.
I would guess you "could" pull a 6', but I wouldn't swear to it.
I'm sure someone on here that has pulled a 6 footer will let us know.
Tom

Donnyj · Jul 2, 2006

You want to make sure the blade covers your tracks. I believe a 6 ft. would be fine.

albmn10 · Jul 2, 2006

Hello Mike, I use a 6ft KK behind my ck30hst and it handles it no problem.. Ive yet to stop the tractor , even filled completely with wet clay and shale.. I would have actually liked the 66" keeping it closer to the width of the tractor,but tractor supply didnt have any in stock.Put it in low and you should be fine if you want the 6'. Good luck.. Matt

mrutkaus · Jul 3, 2006

Thanks for the advice.

Mike

unhappykioti · Jul 3, 2006

Maybe you oughta check the Kioti website they have a very convenient chart that shows which implements are suitable for your tractor.

mrutkaus · Jul 4, 2006

unhappykioti said:
Maybe you oughta check the Kioti website they have a very convenient chart that shows which implements are suitable for your tractor.

Oddly, NOTE KIOTI, the box blade chart on the kioti website does not list the CK30 or CK30HST on the left!!

Mike

albmn10 · Jul 4, 2006

Hello Mike, i just looked and they list the biggest boxblade as the bb20- 72 , so its rated for a 72" . Matt

pipe_welder · Jul 4, 2006

I have the 6 foot box blade behind a CK25 no problem and it covers the R-4 tire width.

unhappykioti · Jul 4, 2006

Go to the Kioti website, click on products, click on CK30HST, when you get to the CK30 page click on specification, scroll to the bottom of the page or click on implements and you will find a chart listing implements for your tractor.