Blade on FEL arms?

[Scooby074]

Pretty cool set up. With some help I could do that. Thanks for the link.

Your Welcome.
Its not a complicated thing to build. About the hardest thing is coming up with the latch mechanism.

I found the standard. Its SAEJ2513. Have a look at this thread, particularly post#2 for more info. http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html

 

[Lloyd_E]

newfiedan... look up 4shorts on TBN via NL... He is in Bay Roberts as well... probably just down or up the road from you... how big can BR be? ... lol...

When you do the project posts lots of pics. I just picked up a 7' snow plow blade to adapt to my QA loader to. Good luck and stay safe and warm over there.

 

[George2615]

I have a Kubota 2360 with the LA243 loader. I want to be able to switch between the bucket and a blade without taking off the whole loader assembly.

Is there a adapter to allow me to do this?

I replaced the 4 pins on my loader arms to pins I could remove easily by pulling a cotter pin. Then I adapted a used truck 7' blade to fit the loader arms. So I can pull the pins, remove the bucket and put on the blade. I don't have angle just straight blade plowing but it works for me.

 

[nybirdman]

I replaced the 4 pins on my loader arms to pins I could remove easily by pulling a cotter pin. Then I adapted a used truck 7' blade to fit the loader arms. So I can pull the pins, remove the bucket and put on the blade. I don't have angle just straight blade plowing but it works for me.

Not to knock your system but;everything would have to perfectly level for this to work.I am sure Kubota makes a quick change for the B series.