Board and Batten Siding Question

   / Board and Batten Siding Question #1  

HoustonBrama

Member
Joined
Jul 11, 2008
Messages
37
Location
Adams TN
Tractor
New Holland TT60
I'm sure this is a stupid question, but I need to know the answer regardless.
Okay, I'm hanging green (from the mill) 1x8 siding. Is there a drying time or a time period I need to wait to hang the battens? If so, how long? Do I nail the battens directly through the boards and into the girts or try and nail through just the battens into the girts?
 
   / Board and Batten Siding Question #2  
If you nail the battens on with a single row of nails, through the crack between the boards into the girts, you can put them on while everything is green. Do NOT nail through the boards themselves, or they will crack at the nails when they dry and shrink...
 
   / Board and Batten Siding Question #3  
See if you can find a copy of "Installing Board-and-Batten Siding" in Fine Homebuilding, July, 1992. The batten should go on as soon as possible after the boards are up so they don't cup as they dry out. The battens don't just cover up the joint. They also are to hold the edges of the boards flat. You may need to predrill your battens to avoid splitting.

Another tip is to lightly bevel the bottom edge of the boards and battens to form a drip edge.
 
   / Board and Batten Siding Question
  • Thread Starter
#5  
Thanks for the great info!
 

Tractor & Equipment Auctions

Kubota RTV 900 (A44502)
Kubota RTV 900...
2014 International WorkStar 7400 Truck, VIN # 1HTWGAARXEH765284 (A44391)
2014 International...
Whiskey Barrel (A44391)
Whiskey Barrel...
Hydraulic Ram (A44502)
Hydraulic Ram (A44502)
Mini Excavator Attachment Set (A44502)
Mini Excavator...
2018 Ford Transit Z50 (A44501)
2018 Ford Transit...
 
Top