Bobcat 753 will not move

[cpp]

I have a Bobcat 753 that is stuck down below my house. I ran it for about an hour today moving some dirt around. A warning alarm came on citing hydrostatic oil was low so I stopped and check it. It did not register on the stick so I added 2 gallons and it started to register and appeared to work fine. I drove it about 100 feet and the alarm came on again. Shut her down and noticed a huge puddle of oil started to form under the machine. I see what appears to be a plate on the side of the machine that looks like an access panel. Do I need to remove the wheels to get this out. Appreciate any advice or troubleshooting info from someone who has a little experience with these machines. Thanks in advance.

 

[nobull1]

I would start by lifting the cab and see if you can tell where the leak is coming from.