Bobcat S185 17-07 error code

   / Bobcat S185 17-07 error code #1  

KellygC

New member
Joined
Oct 20, 2013
Messages
1
Location
Bagley, Mn
Tractor
Bobcat s185
Skidsteer stopped running while idling. Wouldn't restart, "input" displayed in hour meter. Later code of 17-07 came up. Cleaned all grounds, checked main wire harness connections for corrosion(none found). All fuses and relay check out ok. HELP!
 
   / Bobcat S185 17-07 error code #2  
The code is hydraulic lock solenoid open circuit in case you haven't already looked that up somewhere. Hopefully Dennis (SSdoxie) will see your post and give a reply. He's the Bobcat guy on this forum.
 
   / Bobcat S185 17-07 error code #3  
Code means lost communication between main controller and left panel or right Deluxe (keyless panel) if equipped. Communication wires are numbered4 digits and all start with 91. Go to back of each panel and main controller (located in left front fender area). check and wiggle plug connections to see if disappears. If it does remove the connections, clean and apply light coat of dialectic grease.
Also check these wires for continuity of short to ground and/or power. There should be no connection to ground or power with power OFF.
 

Tractor & Equipment Auctions

Yanmar YFL-1575 33HP Utility Loader Tractor (A49461)
Yanmar YFL-1575...
John Deere 1110 Field Cultivator - Heavy-Duty Soil Finisher for Precision Tillage (A51039)
John Deere 1110...
2009 UTILITY TRAILER MFG. CO. SEMI TRAILER 57 (A50854)
2009 UTILITY...
Oil Well Pump Jack with Motor (A49461)
Oil Well Pump Jack...
2014 UTILITY 53X102 DRY VAN TRAILER (A51222)
2014 UTILITY...
TMA (A49461)
TMA (A49461)
 
Top