kupperpooh
New member
Souns silly but how do you engage the mfwd on the new holland boomer 30 series? Also how do you change the pto shaft speed?
Traction Boomer 30 MFWD
- Thread starter kupperpooh
- Start date
- Views: 910
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
Welcome to TBN.
If the Boomer 30 MFWD is set up like my TC29DA, MFWD in engaged/disengaged via a lever on the left fender. PTO RPM speed is controlled by the throttle setting which may be the lever to the right of the steering wheel.
If you have an owner's manual it would be really helpful to read it carefully and often. I still read mine.
If the Boomer 30 MFWD is set up like my TC29DA, MFWD in engaged/disengaged via a lever on the left fender. PTO RPM speed is controlled by the throttle setting which may be the lever to the right of the steering wheel.
If you have an owner's manual it would be really helpful to read it carefully and often. I still read mine.
OP
kupperpooh
New member
I have no owners manual which is part of the issue. It is ordered but, not here yet.
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
It is unfortunate that the owner's manual did not come with the tractor.
If this is your first tractor I wish you many boring hours of operation.
Boring is good. Exciting
is not
If this is your first tractor I wish you many boring hours of operation.
Boring is good. Exciting
is not TheMan419
Veteran Member
On my Boomer 24 there is a lever on the left hand side. It has 4wd, N and 2wd.
PTO is controlled by the engine speed. 2400 rpm = 540 PTO for my boomer 24. Your speed may be different, but that is printed on the dash right above or under the tachometer for me so hard to miss.
I love my boomer 24 it runs like a champ. Easy to use for a first time tractor owner.
PTO is controlled by the engine speed. 2400 rpm = 540 PTO for my boomer 24. Your speed may be different, but that is printed on the dash right above or under the tachometer for me so hard to miss.
I love my boomer 24 it runs like a champ. Easy to use for a first time tractor owner.