weaver
Bronze Member
Does any one have a Pt box blade , My neighbor has one on a ford tractor and it works better than his york rake
box blade ?
- Thread starter weaver
- Start date
- Views: 2596
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
Yes I have one and have put it to heavy use. Today I leveled a half acre and will spend another couple days doing finishing with the box. Started out using the teeth to break up the soil and also help pull weeds. Then put the teeth back up and am now using the blade to level.
PJ
PJ
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
Yes I have one and have put it to heavy use. Today I leveled a half acre and will spend another couple days doing finishing with the box. Started out using the teeth to break up the soil and also help pull weeds. Then put the teeth back up and am now using the blade to level.
PJ
PJ
Piedmont3
Silver Member
I have the 4' pt box blade. I think it works well. i just need to learn how to use it better. I used it to spread the reground, used asphalt that I have for a driveway. It worked well for that but I can't get it to work correctly for leveling loose dirt, or filling the ruts/runoff trenches in my drainage ditch. But I think that is my inexperience using the PT and box blade.
Piedmont3
Silver Member
I have the 4' pt box blade. I think it works well. i just need to learn how to use it better. I used it to spread the reground, used asphalt that I have for a driveway. It worked well for that but I can't get it to work correctly for leveling loose dirt, or filling the ruts/runoff trenches in my drainage ditch. But I think that is my inexperience using the PT and box blade.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,111
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
If it is any consolation, leveling with a box blade on a conventional tractor with 3PT hitch is no joy, either.
If you leave it in float, it tends to ride up and over piles of material.
If you leave it rigid, it tends to rise and fall with the tractor.
The best method I found when I was leveling areas on our property after major excavations was twofold:
One, a heavy box works better in float mode. The weight of it helps hold the material in the box rather than letting the box slip up over the piles. Use the box slowly in float to move large amounts of material from high areas to low areas.
Two, with the box in float, mulitple high speed passes over an area will help level things out faster than slow, methodical, tedious manual raising and lowering of the box.
Anyhow, that's what worked for me on my 3PT hitch tractor.
If you leave it in float, it tends to ride up and over piles of material.
If you leave it rigid, it tends to rise and fall with the tractor.
The best method I found when I was leveling areas on our property after major excavations was twofold:
One, a heavy box works better in float mode. The weight of it helps hold the material in the box rather than letting the box slip up over the piles. Use the box slowly in float to move large amounts of material from high areas to low areas.
Two, with the box in float, mulitple high speed passes over an area will help level things out faster than slow, methodical, tedious manual raising and lowering of the box.
Anyhow, that's what worked for me on my 3PT hitch tractor.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,111
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
If it is any consolation, leveling with a box blade on a conventional tractor with 3PT hitch is no joy, either.
If you leave it in float, it tends to ride up and over piles of material.
If you leave it rigid, it tends to rise and fall with the tractor.
The best method I found when I was leveling areas on our property after major excavations was twofold:
One, a heavy box works better in float mode. The weight of it helps hold the material in the box rather than letting the box slip up over the piles. Use the box slowly in float to move large amounts of material from high areas to low areas.
Two, with the box in float, mulitple high speed passes over an area will help level things out faster than slow, methodical, tedious manual raising and lowering of the box.
Anyhow, that's what worked for me on my 3PT hitch tractor.
If you leave it in float, it tends to ride up and over piles of material.
If you leave it rigid, it tends to rise and fall with the tractor.
The best method I found when I was leveling areas on our property after major excavations was twofold:
One, a heavy box works better in float mode. The weight of it helps hold the material in the box rather than letting the box slip up over the piles. Use the box slowly in float to move large amounts of material from high areas to low areas.
Two, with the box in float, mulitple high speed passes over an area will help level things out faster than slow, methodical, tedious manual raising and lowering of the box.
Anyhow, that's what worked for me on my 3PT hitch tractor.
KentT
Elite Member
- Joined
- Mar 31, 2005
- Messages
- 2,928
- Location
- Sevierville, TN
- Tractor
- 1993 Power Trac 1430 w/Kubota diesel engine
I agree, MR, for leveling work many high-speed passes are usually best, similar to using a harrow of some type...
KentT
Elite Member
- Joined
- Mar 31, 2005
- Messages
- 2,928
- Location
- Sevierville, TN
- Tractor
- 1993 Power Trac 1430 w/Kubota diesel engine
I agree, MR, for leveling work many high-speed passes are usually best, similar to using a harrow of some type...