Bradco pallet forks

[bryant1313]

I did not care for the Kasco ones...much too bulky and the flat plate steel they are using as the back adapter plate makes it impossible to even guess where the tips of the forks are especially on a tractor that has the hood blocking the middle.

 

[dennysm]

I have a set of Bradco pallet forks for my 2210 and they are fine forks if not a little heavy, and my nephew has a set bought at the same time he uses on his 4720 and he has lifted over 2000# with them so I know they are good for my 2210 they are quick disconnect made to fit JD and you just drop the bucket and hook the forks up it takes about 45 seconds. We bought them from Kevin at the Rushville John Deere Dealer, he is a great guy to deal with. they cost me $800 and I do recommend them. fort Wayne has them also.
good luck

 

[davkir]

Thanks for all of the great advice. I ended up with a set from Horst Welding (http://www.horstwelding.com)
They were about 60% of the cost of the ones from J.D. and they weigh about 160 lbs. less.
They fit my 200CX loader perfectly.

 

[davkir]

Another Pic.