Stimw
Elite Member
Brake controllers are really simple wiring that would be easy to hook up.
The input is just off/on from the brake light switch.
They have 12V positive and negative supply.
And the controller will have output from low to high to the trailer brakes depending on settings.
If you don't have brake lights then you can use a panic button or rig a switch on brake peddles.
The input is just off/on from the brake light switch.
They have 12V positive and negative supply.
And the controller will have output from low to high to the trailer brakes depending on settings.
If you don't have brake lights then you can use a panic button or rig a switch on brake peddles.
