I'm in the process of fitting the trailer I haul my YM2000 on with electric brakes. Problem is that there were no wiring instructions with the backing plates. There are two wires coming from the magnet, both green. I'm not sure if one should be a ground or what. Any help would be appreciated.
brake wiring
- Thread starter edmartin
- Start date
- Views: 1409
FleetMan
Bronze Member
Log onto the dexter axle site and download the data you need.
Egon
Epic Contributor
I seem to recall the same problem.
I hookedthe backing plate wires to the white and black trailer brake wires. Worked okay.
Egon
I hookedthe backing plate wires to the white and black trailer brake wires. Worked okay.
Egon
SnowRidge
Elite Member
I've installed the same bits on one of my trailers. Ground either one. It doesn't matter which it is. It does matter that you make good connections. I don't trust crimp on connectors, so I soldered all of mine to be sure. /forums/images/graemlins/cool.gif
