I have a Branson 3620h with 60hrs on it and both the DPF light and exhaust temp light are flashing together, twice. The pattern is 'flash-flash-pause-flash-flash-pause...'.
The owners manual isn't very clear on what this means. It could be "learning error of electronic exhaust valve" ? Or "regeneration fail"? Or something else?
I *think* it started after an axe handle bumped the "ACK" button while I was driving around, so "regeneration fail" seems most likely. However, I cannot seem to initiate a regen. Every time I've tried it just beeps loudly for a few seconds and continues to blink. I also tried disconnecting the battery for a few min to see if that would reset it, to no avail.
Anyone know what's going on?
The owners manual isn't very clear on what this means. It could be "learning error of electronic exhaust valve" ? Or "regeneration fail"? Or something else?
I *think* it started after an axe handle bumped the "ACK" button while I was driving around, so "regeneration fail" seems most likely. However, I cannot seem to initiate a regen. Every time I've tried it just beeps loudly for a few seconds and continues to blink. I also tried disconnecting the battery for a few min to see if that would reset it, to no avail.
Anyone know what's going on?