Branson 4720 3 PT hitch Hydraulics

   / Branson 4720 3 PT hitch Hydraulics #1  

RDBuri

New member
Joined
Oct 23, 2012
Messages
4
Location
Grapeview, WA
Tractor
Branson 4720
Having problems with the 3 point hitch on my Branson 4720. It will not move when the tractor is cold but after it warms up to operating temp it seems to work ok. I don't know if it's the relief valve or the pressure control valve. I have installed a pressure gauge on the loader. When the tractor is cold the pressure is about 200 psig after it warms up it runs about 1000 psig. anyone have a idea what's going on.
 
   / Branson 4720 3 PT hitch Hydraulics #2  
Wonder if your 3pt speed control is partially closed? The knob is behind operator's right heel.
 
   / Branson 4720 3 PT hitch Hydraulics
  • Thread Starter
#3  
Thanks for the tip but I already checked that plus the hitch will lower it's self when I shut down the tractor or dump the bucket even if there is nothing on the arms
 

Tractor & Equipment Auctions

Utility Trailer (A45336)
Utility Trailer...
NEW Land Honor Tree/Post Puller (A48289)
NEW Land Honor...
2020 Kubota B2601 Loader Ready 4wd Tractor (A48561)
2020 Kubota B2601...
2013 Chevrolet Cruze LS Sedan (A46684)
2013 Chevrolet...
LINCOLN ELECTRIC WELDER (A47001)
LINCOLN ELECTRIC...
2007 FORD F550  SERVICE TRUCK (A45676)
2007 FORD F550...
 
Top