5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
+1 on that. Putting hooks up there will bend the sheet metal without substantial reinforcement. In reality that is a ight duty material bucket. Don't expect it to hold up with heavy use. It won't.Warning-internet opinion
Bad place for a receiver, too high and poor hook up visibility.
In general, the center of the (top) bucket requires a lot of reinforcement before you can use it for lifting.
