building a frontend loader for a YM2000

   / building a frontend loader for a YM2000 #1  

MVHF

New member
Joined
Mar 9, 2004
Messages
4
Tractor
Yanmar YM2000
I'm beginning the construction of a loader and would like to see some examples of how tower platform was mounted to the tractor. If anyone has pictures of a YM2000 with a loader, I would appreciate having a look.

Thanks
 
   / building a frontend loader for a YM2000 #2  
My YM240 (same tractor) came with a Great Bend loader. Looking at GB's current photos I don't think they have changed much in 20 years.

See my sig photos.

This GB subframe starts at the lower large bolt below the starter motor. It skips the other large bolt there. (See attached photo). Then a plate is bolted upward to the clutch housing, (next photo) and extensions to the rear are welded to the towbar mount beneath the rear axle. (third photo).

There is also a u-frame welded to the tractor's front frame rails, and the loader has a single grille protector crossmember set low enough to let the hood tilt forward. Hope this helps!
 

Attachments

  • 388218-DSCN4206r.jpg
    388218-DSCN4206r.jpg
    45.3 KB · Views: 1,777
   / building a frontend loader for a YM2000 #3  
Second photo. All the attachment points converge to the crossmember.
 

Attachments

  • 388516-DSCN4208r.jpg
    388516-DSCN4208r.jpg
    80.8 KB · Views: 1,721
   / building a frontend loader for a YM2000 #4  
Third photo - from rear axle looking forward.
 

Attachments

  • 388519-DSCN4220r.jpg
    388519-DSCN4220r.jpg
    68.7 KB · Views: 2,982

Tractor & Equipment Auctions

2019 Allmand Light tower (A49461)
2019 Allmand Light...
2014 RAM 5500 FLATBED TRUCK (A51222)
2014 RAM 5500...
2007 TRANSCRAFT 48X102 FLATBED (A50854)
2007 TRANSCRAFT...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
2023 New Holland CR10.90 Combine - 332 Engine Hours - 244 Separator Hours (A51039)
2023 New Holland...
2014 FREIGHTLINER M2 DAY CAB (A51222)
2014 FREIGHTLINER...
 
Top