Building a gravel pit of your own..

   / Building a gravel pit of your own.. #1  

hr3

Veteran Member
Joined
Oct 18, 2008
Messages
1,135
Location
Mid. Coast Maine
Tractor
7610 hst
Anybody have there own gravel pit on there property ?? I started one a few years back to fill in where stumps were pulled and for other projects.. It's about 30' long by 8' wide right now and goes from 0' to 5' deep at the back side..built into a hillside

I'm thinking I will need to put a fence around the deep end before long just in case someone walks out of the woods into it,,
 
   / Building a gravel pit of your own.. #2  
You need a little fence or a safety ribbon for a pit around it. Also dont make it any bigger than you can reclaim incase EPA gets you for not having a surface mining permit. A friend had a nice gravel pit here and let the county get gravel for a road rebuild. They didnt know how to manage a pit and just made a mess now my friend got left with a big reclamation project. If Its a private pit just keep it neat and your runn off clean and there wont be any problems.
 
   / Building a gravel pit of your own.. #3  
can anyone direct me in the right direction to starting a gravel pit on almost 10 acres. I am looking to sell the gravel.
 
   / Building a gravel pit of your own.. #4  
can you tell me more about the requirements to starting a gravel pit???
 
   / Building a gravel pit of your own.. #5  
can you tell me more about the requirements to starting a gravel pit???

If you are doing this commercially I hope you have a lot of money for all the permits, OSHA inspections, mine safety inspections, etc. plus neighbor approval for trucks on the roads and hours of operation, the list is long. Unless you think u can sell a lot of gravel I doubt if it would be worth it. Just my opinion though.
 

Tractor & Equipment Auctions

2017 PETERBILT 579 TANDEM AXLE SLEEPER (A43003)
2017 PETERBILT 579...
1020 (A44391)
1020 (A44391)
2021 CLUB CAR  CARRYALL 1700 (A45046)
2021 CLUB CAR...
2007 Chrysler Aspen (MPV), VIN # 1A8HW582X7F516547 (A44391)
2007 Chrysler...
USA 5T Weld On Hydraulic Thumb (A42203)
USA 5T Weld On...
2016 Chevrolet Traverse 2LT SUV (A44572)
2016 Chevrolet...
 
Top