bush hog

[bondroad]

I have a ds 4110 41 hp was wondering if that will run a 6' bush hog.

 

[Coyote machine]

Check the capacities on the Kioti web site or owner's manual or dealer.

 

[MotorSeven]

41 HP? Yes it will run a 6 footer no problem.

 

[smstonypoint]

Your best bet is to check the recommended HP requirements from the rotary cutter's manufacturer -- not all 6' rotary cutters are created equal. For example, Woods recommends at least 50 HP for their 6' BB7200X heavy-duty cutter. On the other hand, their standard- and medium-duty 6' cutters require less than 40 HP.


Steve

 

[Lloyd_E]

Shouldn't be an issue. I run a 6' with no problems.

Lloyd

 

[Coyote machine]

Your best bet is to check the recommended HP requirements from the rotary cutter's manufacturer -- not all 6' rotary cutters are created equal. For example, Woods recommends at least 50 HP for their 6' BB7200X heavy-duty cutter. On the other hand, their standard- and medium-duty 6' cutters require less than 40 HP.


Steve

Woods web site says 30-65HP for the BB72x; is that a different model than the one you cited?

 

[smstonypoint]

Woods web site says 30-65HP for the BB72x; is that a different model than the one you cited?

Yes -- the BB72x is a BrushBull Standard Duty cutter (Woods Equipment Company - BrushBull Extreme Standard-Duty Rotary Cutters), while the BB7200x is a BrushBull Heavy Duty cutter (Woods Equipment Company - BB6000, BB7200, & BB8400 Heavy Duty Single Spindle Rotary Cutters ).

Steve