Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!!!

[LiveDog]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

Didn稚 know that. Thought it was a brand they carried. Not made. Good to know.

YUP, I can verify, EA is the OEM for 'LAND Shark'... Their cutting/fitting/welding is prolly your best bang-for-the-buck... I have been impressed enough to go with them on FOUR implements... Do your homework...

 

[J.Wal]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

YUP, I can verify, EA is the OEM for 'LAND Shark'... Their cutting/fitting/welding is prolly your best bang-for-the-buck... I have been impressed enough to go with them on FOUR implements... Do your homework...

I ordered a 60” brush cutter on 3/16 from them! Their brand!

I am really hoping I get t in before or on 04/05 as I am off 5 days straight and would love to get it and go to work!

 

[LiveDog]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

I ordered a 60 brush cutter on 3/16 from them! Their brand!

I am really hoping I get it in before or on 04/05 as I am off 5 days straight and would love to get it and go to work!

My most recent order of TWO (more) implements took a full month (my other/previous 2-implement-orders took WAY LESS time than EA estimated)... Partly because EA is now in the process of moving to a larger building/nearby facility and partly because I had a custom order with the front/rear chain guards... You/I are practically 'neighbors' (I also hang in the Dunlap/Soddy Daisy/Crossville/Pikeville/Whitwell/Cumberland Plateau/Chattanooga, TN... Trenton/Rising Fawn/Lookout Mountain, GA... Gurley/Huntsville, AL, Et al areas)... I LOVE TN/that area... That 3-corner area of TN/GA/AL is awesome... Good luck with your tractor/implements...

 

[countrybumpkin]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

I ordered a rake and was told three weeks of which it will be three weeks tomorrow, I was hoping it would be a bit less but as my luck goes it wasn’t. It’s a busy time of year for them, spring on the horizon.

 

[LiveDog]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

OK... Here we go again... I am back with a test-run-report and will try to post ~14 pics...

1. I received/installed the LP floating-top-link kit late yesterday... Hooked the tractor to the ETA 60" rotary-cutter and made all the necessary checks/adjustments this a.m... For over 3 hours I ran through some VERY tall Cogan grass that is laced with EXTREMELY thick/heavy/nasty vines and 1-2-3" oak saplings... I hope the pics adequately depict the conditions/results... I'll let the pics speak for themselves unless/until I get any questions, but suffice it to say that I am very satisfied with this ETA 60" rotary-cutter and the front/rear chain-guards...

2. There is a video of Ted demonstrating an earlier version of the ETA rotary-cutter that I recommend you watch/listen to... I'll repost it here... How To Bush Hog by Everything Attachments - YouTube

3. I will give a separate report with pics of the ETA 60" gear-drive roto-tiller in about 3 weeks following a fairly large/scheduled project for it... ETA also has a couple YouTube videos of their roto-tiller that I recommend you watch/listen to... Everything Attachments Gear Drive Tillers - YouTube How To Till and Rotovate Your Garden With A Subcompact Tractor/Kubota BX - YouTube



4. I did a LOT of homework on ALL my implements and EverythingAttachments was/IS the best bang for the buck... Do the homework... LMK if I can help you...

5. ETA has several You Tube videos that relate to their implements... They are interesting for what is shown/described... LISTEN carefully to the detailed descriptions of their equipment/manufacturing process and if you have done even a modicum of diligent homework I am certain that you (too) will be impressed... Can't say enough good... Not perfect but certainly in the excellent category... Yes, I do have a few criticisms and recommendations but overall, "best-bang-for-your-buck"... And BTW, S/H has been a breeze/non-issue...

 

[Peter 315]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

Looks good nice pictures:thumbsup: Thanks

 

[Xfaxman]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

Yep, worth staying tuned for. :thumbsup:

 

[LiveDog]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

I did a little more work, made some additional/minor adjustments, and took a few more pics...

1. The ETA 60" Roto-Tiller gear box (no chain)...

2. The ETA 60" Rotary-Cutter and Land Pride QH-15 Floating-Top-Link-Kit...

3. The ETA 60" Rotary Cutter with front/rear chain-guards and 75 HP gear-box connected/cleaned/at rest after a hard day's work...

4. NOTE: YOU may also discern from the previous pics that I utilized the ETA 66" dual-lid grapple-bucket while 'punishing' all the vines prior to hitting them with the ETA 60" rotary-cutter... I did more of this work today and took out (by the roots) several clumps of these dastardly growths... I had an audience of wide-eyed-farmer-neighbors...

Got to say/reiterate, I could not be happier/more satisfied with ETA... I do not have extra money to gamble/waste and ETA has been a Godsend...

5. The new tax laws that took effect ~Sept. 2017 allow for 100% deduction of depreciation of new equipment ('bonus depreciation deduction')... This has been a F'ing HUGE help to our farm and I understand that it will extend into 2018... THIS is part of the reason that ETA/Et al/USA manufacturing/small-business economy is doing well... AVAIL YOURSELF!!!!!

 

[EverythingAttachments]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

I did a little more work, made some additional/minor adjustments, and took a few more pics...

1. The ETA 60" Roto-Tiller gear box (no chain)... View attachment 546514

2. The ETA 60" Rotary-Cutter and Land Pride QH-15 Floating-Top-Link-Kit... View attachment 546515

3. The ETA 60" Rotary Cutter with front/rear chain-guards and 75 HP gear-box connected/cleaned/at rest after a hard day's work... View attachment 546516 View attachment 546517 View attachment 546518 View attachment 546519

4. NOTE: YOU may also discern from the previous pics that I utilized the ETA 66" dual-lid grapple-bucket while 'punishing' all the vines prior to hitting them with the ETA 60" rotary-cutter... I did more of this work today and took out (by the roots) several clumps of these dastardly growths... I had an audience of wide-eyed-farmer-neighbors...

Got to say/reiterate, I could not be happier/more satisfied with ETA... I do not have extra money to gamble/waste and ETA has been a Godsend...

5. The new tax laws that took effect ~Sept. 2017 allow for 100% deduction of depreciation of new equipment ('bonus depreciation deduction')... This has been a F'ing HUGE help to our farm and I understand that it will extend into 2018... THIS is part of the reason that ETA/Et al/USA manufacturing/small-business economy is doing well... AVAIL YOURSELF!!!!!

Thanks for the business, kind words and for showing off your awesome new EA Attachments, LiveDog! Our customers are definitely a special breed with and eye for quality and value. :thumbsup::thumbsup:

I saw this over the weekend, but haven't had much time to hang out on TBN lately cause it's full throttle WILD around here!
Travis

 

[LiveDog]

Re: Bush Hogging HOW-TO VIDEO With THE ETA 60" BRUSH CUTTER & Our New Video Tractor!!

Here are a few more recent pics of the ETA 66" dual-lid wicked grapple (and the ETA 60" 75hp rotary-cutter w/ front/rear chain guards) in action... Previous pics show the original 'semi-tropical jungle' with extensive large vines/cogon grass/1-2-3+" brush and the initial 'taming'... These pics show a more finished product (cleared boundary-line access road) utilizing the grapple teeth to remove trees/brush/vines/stumps/roots and some grading... Not sure if you will see the pile of vines but it is impressive (will try to retake/submit this later)...




OK... I ran out and took some more pics including the pile of vines while I could still 'edit'... Some of them are at least 2" with well grounded multiple runners HIGH into the trees/brush... Here are 4 more pics...




I prolly should have posted this on the Wicked Grapple thread... Oh well...