Buying fOTON 404

[crazymike]

Thanks for the info. Rdbigfarmboy, what if any problems have you had and did you change fluids immeadiately after delivery? How is the warranty support and how was your experience purchasing from Rural King?

Paul

Personally, I recomend checking for adequate fluid levels first. If everything is good, give the tractor a good burn in period. 1-2 hours. Vary the RPM, run the tractor around, run through the gears, hi/lo 4wd. Then do your service and change all the fluids and filters. (your foton should come with all the spare filters) This will get most of the filings, etc... off all the castings.

If you don't do this little burn in first and just change the oil, your new oil will be quickly contaminated with all the filings from your new engine. And then you will probably need to do another service.

The only other thing I reccomend with the foton, and any chinese tractor is get a few cans of rust proofing. Do your undercarriage, 3PH, etc.. any external. They are prone to surface rust. Although basicaly harmless, it looks bad. This is due to a poor priming process during paint. Something we have been trying to work with foton on.

 

[drdage]

I have been looking at purchasing through Ruralking in Il. They are telling me that their latest stock of 404's are 4 cylinder units and the hoods are about 7" longer then the 3 cylinder models. I talked to a dealer out of Ia who said that these 4 cyl. were a short run and about to be discontinued. Anyone else Know anything about the 3 vs 4 cyl situation?

Paul

 

[jwnge]

Anyone have experience with the Foton 40 hp or 25 hp units? How about spirit loaders? I am thinking about purchasing. I was loooking at Kioti as well but would like to spend less $. How much mechanical ability should a chinese tractor owner have?

Paul

The Spirit Loaders have been made here in Waupaca Wisconsin. They were a Jinma Dealer and had jinmaparts.com. They were also where I bought my Mahindra 2015 and were excellent dealer till he decided to just manufacture loaders. He no longer sells Jinmas or Mahindras. He seemed to be very proud of the Spirit loader.. John J

 

[crazymike]

I have been looking at purchasing through Ruralking in Il. They are telling me that their latest stock of 404's are 4 cylinder units and the hoods are about 7" longer then the 3 cylinder models. I talked to a dealer out of Ia who said that these 4 cyl. were a short run and about to be discontinued. Anyone else Know anything about the 3 vs 4 cyl situation?

Paul

The 50hp units are all 5 cyl

None of the 40s we have got have been 4 cylinder, but it doens't mean it's not an option.

Keep in mind, if you go with a north american loader, it may require you shipping the tractor for a refitting if the dealer hasn't done so already.

 

[rdbigfarmboy]

Mine care from Rural King and were pretty well preped.
Recently the brake light and safety start switch both are under the floor plate have shorted. The design of the switch is not water proof and moisture has shorted both.
Otherwise no problems.

 

[crazymike]

edit, my post had a typo, I meant 4

 

[Dargo]

My local Rural King just got in a new 70 hp Foton cab model and it looks completely different from the 70 hp model they had last year. The new unit is a vast improvement and the fit and finish are so much better I can't believe it's the same company! Has anybody bought one of those and put a Koyker loader on it? If I could get a good deal on R4's for the 70 hp Foton cab unit and a decent price on a powerful Koyker loader for it....man, it sure would be a lot of tractor for the money!! I'd love to hear if anyone has used such a thing; whether it's an individual or dealer.

 

[3RRL]

I saw those pictures too of those larger 70hp+ Fotons. They remind me a lot of my 55hp Kama only way nicer and with a cab.... more like pictures of the 80 to 100hp Kamas I saw. But the drive train and beefiness are very similar looking. The new Fotons sure are good looking with great fit and finish to my eye.

 

[crazymike]

My local Rural King just got in a new 70 hp Foton cab model and it looks completely different from the 70 hp model they had last year. The new unit is a vast improvement and the fit and finish are so much better I can't believe it's the same company! Has anybody bought one of those and put a Koyker loader on it? If I could get a good deal on R4's for the 70 hp Foton cab unit and a decent price on a powerful Koyker loader for it....man, it sure would be a lot of tractor for the money!! I'd love to hear if anyone has used such a thing; whether it's an individual or dealer.

we have sold a few with north american loaders and now have sold some with tool carriers and plows for commercial use.

In the spring we should be getting in the 125 HP models and hope to fit with duals and a quick attach loader.

 

[Foton404]

I have a Foton 404 with about 130 hrs that I upgraded from a 254a this year. I have a 40acre hobby farm and commercial mowing business. One job is a 70 acre business park, and the 404 is a workhorse. I average 0.8 gph with a 9' sickle mower. So this efficiency and economy translates to profit. The 254a with a 5' deck just wasn't cutting it, so to speak. For it's size it's a beast. Compare the castings on the 404 with the larger Fotons and it is apparent. Really a remarkable tractor for the price. Would I recommend it,..absolutely.