bx 1500 quick connect leak

[automech]

I developed a dripping leak at one of my loader quick connect lines. Are the seals in there replaceable? I tried to get a new fitting today at the dealer, got home and it was the wrong one. Of course I need the loader now, not next week when the correct part can be ordered. I have not been able to unscrew the fitting off of the steel line cause I don't have my line wrenches at home and it's super tight. I was hoping to replace the seals inside by matching them up. After picking at them with a pick I think I ruined the fitting all the way now.

 

[Deano]

Not sure if your QD's are the same as BX24, but here is a post of what I found out when I went through the same situation:

http://www.tractorbynet.com/forums/kubota-owning-operating/144758-bx-loader-quick-disconnect-o.html

Deano

 

[kuboman]

I developed a dripping leak at one of my loader quick connect lines. Are the seals in there replaceable? I tried to get a new fitting today at the dealer, got home and it was the wrong one. Of course I need the loader now, not next week when the correct part can be ordered. I have not been able to unscrew the fitting off of the steel line cause I don't have my line wrenches at home and it's super tight. I was hoping to replace the seals inside by matching them up. After picking at them with a pick I think I ruined the fitting all the way now.

Most QC have an O-ring plus a nylon backup ring. Likely have to get them at a dealer