BX 2200 FEL Hose Set Up??? HELP

[Junkman]

BX2230 uses a completely different loader valve set up than the BX2200. You might say that Kubota finally figured out how to fix the loader valve problem with the BX2230, but still hasn't come up with a retro fit fix for the earlier BX series tractors. /forums/images/graemlins/frown.gif /forums/images/graemlins/mad.gif

 

[kubotabilly]

Tom,
I found out from my dealer this morning that if your standing in front of your bucket, the 2 connections on the left side of the valve are the bucket tilt connections and the 2 on the right operate the loader arms. Just put the hoses on and see if it works. If not, switch them until it works. It should'nt be too hard to figure out.

Bill

 

[NY_Yankees_Fan]

Bill,

Thanks for the info I will give it a try.

Tom

 

[SeymourBota]

If you are still stuck, I can post a pic from an overhead angle tonight that might help.

 

[NY_Yankees_Fan]

This worked for a 3 way valve on a BX2200.

If you are looking at the valve from the front of the BX.

Left Top- Blue

Right Top- White

Left Bottom- Red

Right Bottom- Yellow.

Thanks for all that posted. Spent a few hours moving dirt tonight, was so much fun. Now to mount the 60" MMM and cut some grass.