BX FEL Dolly Help!

[snowman]

"I just don't understand the need for a dolly after thinking about it. You position the loader where you want it to be and take it off. When you need it, you put it back on in the same position you took it off. It hasn't gone anywhere and it doesn't need any adjusting, you just slowly drive into it. Ya'll must have some serious time on your hands to be making a dolly for a loader.....Now the 3PT implements I can fully understand!"




My reason for an FEL dolly is because I have a front mount blower I use in the winter; don't use the FEL much. With the FEL on a dolly, after I take it off the tractor, I can turn the FEL around so that the arms hang over the mower I have stored in the garage. Takes up alot less room. Basically, it just enables you to store things easier my moving them around.

 

[woodstock]

I thought it was obvious too, snowman.
Like today for example, I've already got the front snow blower on. Because we haviing freaky warm weather still, my neighbour wanted to borrow the tiller which is roller, on its dollie, under a work bench in the corner of the barn. But to get at it I had to move the FEL. This took 30 seconds to roll the FEL over and roll out the tiller. Without the FEL dollie, I would have had to take off the blower install the FEL and vise versa, certainly not a 30 second stroll.
First time my neighbour has seen either dollies. He was amazed, especially how easy it was too hook up the tiller while on a dollie. He said he is now going to make same for all his attachments.
Why grunt and groan when you can roll without a moan.

<font color=red>Winnipeg, Manitoba</font color=red>

<font color=blue> Rest in Peace Pamela 2</font color=blue><font color=purple>
2001 BX2200 (68 hrs)

 

[woodstock]

Part II FEL Dolly Help!

I like how part I works and I think I have Part II solved. I just can't remember where I saw them and where I can buy them.
What am I referring too?
It looks like a deep saucer with three casters on the edge. I think they were used for moving pianos. The end result was a nice pocket for the piano legs, FEL legs, to sit in while barely raising the legs off the floor by more than an inch.


Have you guys seen this?

<font color=red>Winnipeg, Manitoba</font color=red>

<font color=blue> Rest in Peace Pamela 2</font color=blue><font color=purple>
2001 BX2200 (68 hrs)