BX PTO lever very hard to engage

   / BX PTO lever very hard to engage #11  
Jim, It isn't very scientific, but after a good spraying of WD-40 both my PTO and gear levers engaged a lot easier.
Good luck JT
 
   / BX PTO lever very hard to engage #12  
I'm sure you got the "Don't force it!" message, so I'll save my breath...but as far as the scuffing, I move it to the side ranher than roughly over the safety catch. Try it, you'll find it much easier to shift in as well as save the clear plastic. I alwo have problems intermittently selecting the PTO, but found that engaging it and trying it again solves the problem. Never had much problem that I can recall about actually engaging it though...
 

Tractor & Equipment Auctions

2019 Doosan LCV6W Towable LED Light Tower (A51691)
2019 Doosan LCV6W...
2008 IC Corporation PB205 Bus, VIN # 4DRBVAANX8A506494 (A51572)
2008 IC...
Target Ecoline Walk-Behind Concrete Saw (A49461)
Target Ecoline...
2014 FORUM HORIZONTAL 3 PHASE SEPARATOR (A52472)
2014 FORUM...
New Wolverine 3pt Receiver Hitch (A53002)
New Wolverine 3pt...
2018 MDB T5E MDB DISC MOWER (A51406)
2018 MDB T5E MDB...
 
Top