BX vs L series front hitch? Possibly installing a L2052 blower on a BX2660?

[aczlan]

I found a deal on a L2052 snowblower locally. It was on an L series, so it would have the larger quick hitch. It looks like I could get it cheap enough to make it worth ordering the female side of a quick hitch and swapping that over.
Will this be way too big? We have a 60" blade on it now and that is a little small for the tire width when the snow gets deep.

Thanks

Aaron Z

 

[Fallon]

If your tractor is a HST you can run any reasonable sized blower. Just have to go slower to keep the RPMs up & not lug it.

 

[kevincook]

aczlan, I sent you a PM.

FYI, I have the same blower on an L3010 and the L2052 will definitely bog the tractor down in 10" of snow if I don't go slow.

Kevin

 

[aczlan]

aczlan, I sent you a PM.
FYI, I have the same blower on an L3010 and the L2052 will definitely bog the tractor down in 10" of snow if I don't go slow.
Kevin

Good to know, I ended up getting a 84" Loftness with a front mount kit off of a NH and will be putting it on our L3830.

Aaron Z