Oct 10, 2003 / bx22 work light Thread Starter #11 OP Garrabo Banned Joined Jul 22, 2003 Messages 573 Location GA Tractor 3120,X-575,BX1830,BX22 where do the wires exit to feed the light?
Oct 10, 2003 / bx22 work light #12 J jpr62902 Platinum Member Joined Jul 17, 2003 Messages 545 I drilled through the ........... (cue the scary music) .... ROPS!!!!!!! I then put quarter inch rubber grommets in the holes and fed the wires thru those.
I drilled through the ........... (cue the scary music) .... ROPS!!!!!!! I then put quarter inch rubber grommets in the holes and fed the wires thru those.
Oct 11, 2003 / bx22 work light #13 J jpr62902 Platinum Member Joined Jul 17, 2003 Messages 545 I'm gonna try posting a better pic. Here's a closeup of the lights. You can see the red wire coming out of the ROPS. this is before I put the grommet in and wrapped the wire with electrical tape.
I'm gonna try posting a better pic. Here's a closeup of the lights. You can see the red wire coming out of the ROPS. this is before I put the grommet in and wrapped the wire with electrical tape.
Oct 11, 2003 / bx22 work light #14 J jpr62902 Platinum Member Joined Jul 17, 2003 Messages 545 Oops! Try again. Attachments 326460-ropscloseup.jpg 80.1 KB · Views: 206
