Will_C
Veteran Member
- Joined
- May 24, 2002
- Messages
- 1,785
- Location
- Upstate N.Y.
- Tractor
- Kubota L3560, Toro 52" and 60" ZTRs, Kubota RTV 900
It is not that hard of a job to clean. If you want to leave it on the tractor, I have been stopping the tractor on the trailer ramp amp and have enough clearance there. It also works if you use a couple of car ramps. I usually pull the MMM off the tractor every 10 hours to clean, grase, and sharpen the blades.
Will
Will
