BX2200 FEL snowplow mount.

[Anonymous Poster]

Hello gang, I now own a new BX2200 with about 4 hrs on the clock. All 4 hrs. were spent moving snow here in De where I live with a rear blade Landpride 1560. I owned a TC33D before this tractor . I used it in my landscaping business. It had a custom FEL mount with a six and a half foot Meyers poly plow. I had to give up the business due to an accident and injuries that prevent me from doing what I loved. Well I'm now thinking of making a mount for the BX bucket and using either a Kubota 1750 60" front manual angle blade or a Cub Cadet super garden tractor blade 54" mounted in the bucket as I did with the TC setup. Have any of the owners out there thought of doing this with their BX ? I don't mind turning around to see the blade but my neck is a major portion of the accident problem and it is painful as the dickins to do for any amount of time. So give up the advise about which blade you all may think is the best. The Kubota blade is heavier by looks but I'm not sure about that. Both would be manufactured to work with a two pin setup for hookup and release same as I did with the TC. I didn't mind the fact that the blade was manual angle since I don't have to change the angle very often and the less complicated the better.
Thanks Bigguy ( Former name Scaper)