BX2200 going synthetic QUESTION

[r0GuE]

Hi,

I'll keep this simple. I need to go synth because I store in an unheated shed, and I had alot of trouble starting when REALLLY cold.

I'd like to go with a WIX filter and synthetic oil. I cannot find the right WIX # for the BX2200. And I need a reccomendation for a good brand and type of synthetic oil for the BX2200.

Thanks for the help. /forums/images/graemlins/smile.gif

 

[MikePA]

Redline, Amsoil, Mobil 1, Shell.

For filters, go to Hastings Filters and get a filter number. Then visit any favorite filter manufacturer for their equivalent part.

KUBOTA>Tractors>BX2200 Mower>BX2200 Mower w/D905E Eng.>

Part Prompt Notes Part No Qty
Lube (70000-15241) LF523 1
Fuel (12581-43012) GF2 1

 

[Junkman]

From another post in the Kubota forum.... your wix number is 51064. I use Rottella Synthetic from "AndyM'" & "gsxr1100" favorite store.... these two fellows reccommend Walmart ..... $12.88 per gallon

 

[gsxr1100]

I would only ask what are you looking for in a synthetic oil? Anything from a group 3 to a 5 can be classified as a synthetic. Are you looking for the least expensive or the ”top of the shelf” oil. Do you want an oil that protects longer, better oxidation protection, higher Phosphorous, Zinc, TBN etc. They range from $12.88 (as Junkman posted) to about $20 for the good stuff. I personally would spend the extra $8.00 for the better oil but that is me.

Basically it comes down to are you looking for a good basestock or additive package.

To close,I recommend Wal-Mart and Rotella as much as I recommend an American car/truck. I linked my "Joy sig" to the walmart.

 

[MikePA]

<font color="blue"> gsxr1100:I would only ask what are you looking for in a synthetic oil? </font>
<font color="red"> rOGuE: I need to go synth because I store in an unheated shed, and I had alot of trouble starting when REALLLY cold. </font>

 

[gsxr1100]

I know pour point is important; however, I would not base an oil 100% just for that. Plus using a synthetic does not mean it will help.

example, Walmart dino (supertech I think) oil can go down to -35 F. I would look at a blend since that might be cheaper if the properties of the oil are not important except for pour point.

Lastly, a pour point does not mean the pump will pump the oil either.

 

[BRIGUY]

I have been using Mobil 1 5w40 (Truck and Suv) in my BX 23.

You can get it at SHHHHHHHHHHH!!!!!



Walmart

But it's about the same price at some auto parts stores.

The Rotella product would be a little less cash and would be fine.

The Amsoil, redline, Royal purple etc. Will probably be a little better than M 1, But how often do you service?

 

[gsxr1100]

Brian --Mobil 1?? Say it is not soo. ZDDP is pooooooooor.

Since 5w-40 is not on the list (below): Looks ok since it has Moly in it and a good TBN. Again ZDDP protection is not really that good, to me. With these #'s Motorcraft 15W-40 is better. I do not know what you are paying for the M5w-40, but if over 8 - $10 for 1-gallon, it is too much.

From BlackStone, Virgin 5W-40 Mobil 1
Copper: 1
Iron: 2
Chrome: 0
Lead: 0
Aluminum: 1
Silicon: 7
Molybdenum: 0
Sodium: 1
Calcium: 2246
Tin: 1
Potassium: 0
Magnesium:446
Zinc: 1058
Water: 0
Phosphorus:958
TBN 12.9
Boron: 55
Viscosity:75.7
Flash:435

 

[SeymourBota]

http://www.amsoil.com/products/hdd.html
currently in use in my BX2200 and B2410

 

[r0GuE]

I change it out every 6 months. I don't mind spending $8 extra since the BX only takes about a gallon anyway. Is there a spec for deisel specific that I need to look for? I saw alot of brands thrown out there, do they only make the one, or do I also have to question viscosity? /forums/images/graemlins/confused.gif