I have looked all over for a post hole digger to fit on my BX2200. Here's photographic proof that they do exist. This is a Worksaver model 300 w/ 30" auger. A 12" extension is sitting on the bucket but I haven't tried that yet. I think the 30" auger will have to be in the ground before the extension will fit as there is only about 8-10" of ground clearance. I haven't tried drilling extra holes in the lift arms to get more height because my baby is still too new. Prices were $488 for the digger, $94 for the auger, and $79 for the extension. Hope this helps anyone looking for a digger.
BX2200 w/ Post Hole Digger
- Thread starter lawndart
- Start date
- Views: 1517
-
- Tags
- kubota bx2200
NYTrainer
Silver Member
Great post but the attached picture didn't seem to make it through. Try that again.
Also, I forget who modified the lower arms on their BX, it would be great if someone could post a pic of the modified lower arms so that I could see exactly where to drill mine. Thanks.
Also, I forget who modified the lower arms on their BX, it would be great if someone could post a pic of the modified lower arms so that I could see exactly where to drill mine. Thanks.
day13
New member
I've got the same PHD w/o the extention. It works great.
Dave
Dave
I found the attached photos on the forumfiles page by searching for the file numbers (2-65832). I noticed the file name was changed where I had blank spaces in the file name. I'll change the name to eliminate spaces and try to repost.
Dug a few more postholes yesterday and it worked great!
(picture is viewable from this link now)
<P ID="edit"><FONT SIZE=-1>Edited by lawndart on 08/26/01 10:45 PM (server time).</FONT></P>
Dug a few more postholes yesterday and it worked great!
(picture is viewable from this link now)
<P ID="edit"><FONT SIZE=-1>Edited by lawndart on 08/26/01 10:45 PM (server time).</FONT></P>
