Oil & Fuel bx2230 fuel guage

[nysdotinspector]

Just checking to see if anyone has had this problem. My fuel guage seems to read full, and I know I have about 1/2 to 3/4 of a tank. I suspect a problem with the sender. Any ideas would be helpful. I still have a year and a half left on the warranty, but I would like to fix it myself. Thanks

 

[Scrounger]

My guage is not very accurate either. I think it reads high all the time too. I think its a design issue personally.

 

[midlf]

Mine is not very linear. "F" is from full to 2/3 full and from "F" to "E" is really from about 2/3 to 1/6. At "E" I have about 1/2 gallon left. All this applies only when the tractor is level. Any tilt, especially side to side and the gauge reading is pure fantasy.

 

[tomnky]

The float arm where attached to the sending unit pivots via ball bearings , if You have ever repaired the fuel leak on a BX , You can readily see why the float moves around so much.

Granted it will last forever with ball bearings but it does not make for a very stable fuel gauge. /forums/images/graemlins/shocked.gif /forums/images/graemlins/shocked.gif