BX23 FEL and BH not movong

EricBX2200 · Jun 22, 2008

Might not be your issue but the same thing happened to me. I put the back hoe on and had the hose pinched when the back hoe was tilted up into position. I guess it took a while for it to cut off the pressure because it worked for a while.

It had me puzzled for a while.

stuarth · Jun 22, 2008

Leave it like it is and I will trade you for a JD 2305 with a 200CX FEL, 54" MMM, 54 front blade and two sets of wheels and tires r4's and turfs.

tommu56 · Jun 23, 2008

I had the same symptoms and the 3 point knob was in the raise position for the 3 point and it has priorty over the loader and hoe.

Move the 3 point lever down while down see if you can push arms down if they are stuck open flow control amore to let it down faster.
Pull the 3 point up and see if they raise.
Put it in middle and try loader then back hoe
tommu

Tractor_Jim_CT · Jun 23, 2008

Wanted to take a moment and thank everyone who responded to my questions. I moved the 3 PT Hitch lever and I noticed a change. The FEL and BH came back to life, so the problem was that simple.

I was relieved and had some seat time which is always enjoyable.

Thanks All

Jim