BX25 and its Implements w/bxpanded carts and one of mine

[stuarth]

Here is my BX25 and its implements along with the three carts for when they are not attached to the BX. I found that with only a two car garage that already has two motorcycles in it I can not move about meaning I can not get to the loader if the blade or BH are in the way without first attaching them too. The other thing I have found is using the carts from BXPANDED is that the BH not only takes up LESS room but it makes taking it off & on even easier than before. And yes I also have Larry's wheels for the mmm. These are a real must if your limited in sq ft.

 

[radioman]

Oooh . nice toys !! congrats.

 

[PINGG2BLUE]

Congrats, nice unit you have there.

 

[Tractor Factor]

Wow, that is beautiful. I thought with the switch from plastic it wouldn't look so shiny and glossy. Dang, I guess I'm gonna have to keep it clean.

Hey, stuarth, have you bought a 3 point hitch for it yet by any chance? If so, where did you get it and how much did it cost?

 

[Tractor Factor]

You know, I had seen those dollies and thought they were great. Not sure why, though - at least for the FEL - you couldn't save some $ and just use a heavy duty wooden one from TSC. The backhoe seems to be long and might be a hard size to find for a good fit.

 

[stuarth]

That is what I started to do was build one. Then I decided to buy the backhoe one (it is really nice and not only does the size fit it is the correct height) and build one for the FEL. When I received the backhoe one it was so nice I ordered the FEL one and some extra casters for the cart I was building. The one I built turned out to be good for the snow blade and it still includes BXPANDED's casters.

 

[YotaBota]

So where do you get those implement dollies? Is there one for the rear mounted grass catcher as well? Oh gee and while I'm at it, what about one for a snowblwer since I've got that too.

 

[thavil]

So where do you get those implement dollies? Is there one for the rear mounted grass catcher as well? Oh gee and while I'm at it, what about one for a snowblwer since I've got that too.

The FEL and BH dollies can be found here BXpanded.com. Haven't seen a specific dolly for a grass catcher or snowblower but you may be able to use furniture dollies for this. I use furniture dollies for my box blade and 3PH spreader.

 

[C6rider]

I have the BH dolly and love it. The only thing I would caution about is to tie up your stabilizing legs with more than just a bungee. I used a bungee last winter and they leaked down so much and stretched the bungee I had to rearrange my garage to move the BH to my tractor.

 

[ejnichol]

I bought several of the 12 inch square dollies from northern hydraulics for 14.99/eaqch. They work better than furniture dollies like hd sells. The bh broke one of the hd versions.

I do think that metal bh dolly might be better since it appears to keep the bh from unfolding,