jwatt51
Silver Member
I just removed my front mount snow blower from my BX25 and after I removed the quick hitch attachment,I noticed the shaft on the quick hitch was really loose. there are 2 bearing flanges on it that's attached with 2 nuts,bolts and lock washers. One flange was just floating on the shaft and the 2nd had only 1 nut,bolt and lock washer holding it on. The attachment was installed at the dealer in Oct. I'm not sure if this is a dealer install issue or if it came from Kubota like this.I wanted to let anyone know that has the front quick hitch attachment,just to check those four nuts and bolts.they each have a grease fitting on them for the bearings.I think if that last nut and bolt fell off,it could probably cause some damage to my snow blower.Next time I'm up at my dealer,I'm going to let the service dept. know about it.
